You are not logged in.

#1 04-01-20 03:14:43

Admin
Administrator
Registered: 01-12-19
Posts: 137

Guides for using @autopot

Hey everyone!

Here's the guide for using @autopot. If you guys type @autopot in game, it will show the informations about this command.
screen-Elements-RO004.jpg

So, how to set @autopot to work?

Well, you will see this informations after using @autopot

@autopot <hp|sp> <item id> {<min hp|sp % [1..100]> {<delay [100..1000]>}}

where,
<hp|sp> is the choice whether you want the autopot trigger on hp or sp.
<item id> is the Item ID used for healing. ( Example: Yggdrasil Berry = The item id for this item is 607)
<min hp|sp % [1..100]> is minimum percentage of HP/SP for @autopot to trigger. ( Example: 1%, 10%, 40% )
<delay [100..1000]> is the delay for using the items in milisecond. ( Example: 100, 600, 700 )

So, this is how to set

Example:

@autopot hp 607 80 100

Where 607 is the item ID for Yggdrasil Bery. 80 is a percentage for autopot to trigger and 100 is the delay for each berry used in miliseconds.

You should see the informations like this if you set it right

screen-Elements-RO005.jpg


If you want to set autopot for SP, just do the same step as above. Just change hp to sp.

Examples:

@autopot sp 607 30 100

You should see the informations like this if you set it right

screen-Elements-RO007.jpg


If you want to set it for both HP and SP, you need to type the command separately.

Example:

@autopot hp 607 80 100

and

@autopot sp 607 30 100

You should see the informations like this if you set it right

screen-Elements-RO008.jpg

Offline

Board footer

Powered by Elements-RO